Register |

SmartDist Jr.

Products

SmartDist Jr.

NOTE:  This product has been discontinued.

 

The "Smart" Block Digestor for Reduced Volume Distillations

10-position for reduced volume distillations or 20 positions for acid digestions for TKN and TP

SmartDist Jr. Distillation UnitDistillation procedures include:

  • ammonia
  • cyanide
  • fluoride
  • phenol
  • sulfide, total
  • sulfide, acid-soluble

Digestion procedures include:

  • total Kjeldhal Nitrogen
  • total Phosphorus

Components

Heating Unit
  • Continuous heating element
  • Improved temperature uniformity
  • Improved temperature stability
  • Improved heat transfer
Smart Controller
  • Large, easy to read LED display
  • Simple keypad entries to set programming parameters
  • 8 stages of temperature control
  • 8 stages of dwell times
  • Programmable rise rates for each temperature stage
  • Flash memory - no battery required
Digital PID (Proportional, integral, derivative) temperature control
  • Delayed start
  • End of run alarm
  • Programmable high temperature cut-off
  • Type J thermocouple
  • Built in diagnostics
Additional Safety Features
  • Open thermocouple detection
  • Over temperature detection by microprocessor
  • Redundant circuitry for over temperature protection
  • Independent of microprocessor and Triac
Glassware and Accessories

Distillation glassware is available for the following analytes:

  • ammonia
  • cyanide
  • fluoride
  • phenol
  • sulfide, total
  • sulfide, acid-soluble

The cyanide, fluoride, and both sulfide, a 10-position gas/vaccum distribution manifold is required. In addition, all the flexible tubing is provided as well as a comprenhensive methods manual.

Digestion

A set of 20 digestion tubes calibrated to 250 ml.

Stand

The stand holds the tubes during the digestion process, dilution, washing, and transfer. Specifically designed side plates snap onto the stand to minimize temperature fluctuatins from air drafts during digestion.

Retainer Plate

The retainer plate locks the tubes in position in the rack allowing the entire assembly to be turned upside down to facilitate cleaning.

Specifications

Physical

Heating Unit 66 lbs.
Smart Controller 9 lbs.

Dimensions

Heating Unit 8½"H x 13½"W x 20"D
Smart Controller 6 ¾"H x 6"W x 10"D

Temperature

Control Range and Resolution: 50°C to 400°C in 1° increments
Accuracy: +/- 2° in control range
Amplitude at Set Point: Less than +/- 1°
Repeatability: +/- 1°
Stability: +/- 1°
Ramp Rate: 4°C/minute

Electrical

Operating Voltage: 208-240 volts, 50-60 Hz
Current: 12 Amps @220 volts
Fusing for Heating Unit: Two 15 Amp fuses @250 volts
Fusing for Smart Controller : Two 1 Amp fuses

Unity Care

Unity Care is our Customer Support portal designed to provide immediate access to help and support materials that allows our customers to get maximum value from their Unity Solutions. 

Get Support